If you BFR cuffs are either not inflating, or inflating slowly while otherwise making all the correct sounds. It's possible the module isn't securely mated with the cuff - so that while the pump is operating, it mightn't be filling the bladder.

If you find your cuffs are not inflating, or if instructed by SAGA Support, please try the following:

  1. Re-attach the module to the bladder by pushing the module down directly onto the 4 locking pins. Each pin should 'snap' into place.
  2. With the module firmly attached, massage the area inside the cuff behind the two bladder intake ports - these will likely be felt as protruding from the inside of the cuff before being massaged into place.