Issues with calibration

If you're experiencing inconsistent or failed calibrations, ensure that you're following the proper protocol as described below.

• Ensure the cuffs are positioned properly.

Arms: Place the BFR cuff at the highest point on the arm, just under the deltoid as pictured below.

Legs: Place the BFR cuff at the highest point on the leg, just under the glute as pictured below.

• Remain still with your limb relaxed during calibration.
  • Arms: Stand or sit with your arm relaxed at your side.
  • Legs: Stand relaxed or lie flat on your back in the supine position.
• In the case of leg calibrations, ensure nothing is touching the outside of the cuff (i.e. ensure you are not sitting on the cuff or it is not pressed between your leg and a supporting structure).
• For consistency, try to perform the calibration in the same position every time.

Calibration troubleshooting

If after following the above guidance you're still having trouble calibrating the cuffs:

1. Hold the power button until the cuffs turn off completely
2. Remove the SAGA app from your device and reinstall it
3. Toggle your device's Bluetooth setting off and on again
4. Open the SAGA app, reconnect to the cuffs, and initiate a calibration

Still running into issues? Reach out to support@saga.fitness.