What to do if BFR Cuffs do not inflate?

If you are unable to inflate your SAGA BFR Cuffs, it is possible the module is not securely connected to the band and therefore while the air pump is working it might not be filling the bladder.  

Please try the following to firmly secure the module to the band: 

1. Feel the cuff material where SAGA BFR Cuffs module attaches to the band. 
2. The area should feel smooth with two small, rounded bumps. These bumps are the two plugs that connect the airbladder in the band to the module.
3. Push down on the plugs to firmly secure the module-to-band connection.  

If you are still unable to inflate your SAGA BFR Cuffs, ensure there is no residual air in the air bladder prior to pressing inflate. This can be done by gently applying pressure on the cuffs to remove the air.